Tact Switch Side-Operational with Bracket and Positioning Post

When it comes to tact switch side-operational, we will unintentionally think of that side flat switch button, the style looks similar, the difference is that there is a bracket with a positioning post, with a positioning post tact switch side-operational is very good to identify, but with a bracket will mislead a lot of people. What would be the use of a bracket, in terms of assembly and design are more difficult, said the side button tact switch is more common is with a positioning post and with a bracket two kinds, as shown in the following figure with a bracket and with a positioning post side button.

Side button tact switch of the two forms can be the same parameters, parameters, including service life, the use of strength, temperature resistance, humidity resistance, etc. and even the use of shrapnel can be the same, they are only the appearance of the part is not the same, in the use of the same, if the two types of switches installed in the product operation, basically can not be distinguished which is with bracket, which is with the positioning column. Whether with bracket or with positioning column, they are for better fixed in the product, the side button tact switch is different from other tact switch, it only two feet conductive no more feet to fixed, other tact switch will have four feet or even more, then more feet in only two conductive, the other is to play a fixed role.

Side button tact switch in the assembly of manual is very difficult to assemble, and chip tact switch, need to rely on machine assembly, so fast and accurate, manual assembly is very easy in the welding time damage. Because tact switch side-operational foot position is relatively short but also bracket or positioning column and product alignment, and switch welding temperature is so high, long time will be damaged, high temperature will also be damaged, so in the assembly, generally use the machine, seldom use manual assembly, but plug-in tact switch many are assembled manually.

With bracket and with positioning column can be used together in a side button tact switch, in general will not be products will not be so designed, this setup is to meet the poor fixation of the product, rarely set up into the use of with positioning column and with bracket is not easy to assemble, or even more difficult.